Operating your Fan
WARNING Keep all objects at least 1 metre from the front, sides and rear of the
appliance
Filling the water tank
Make sure the fan is off and unplugged.
Pull out the lower end of the mist delivery hose, then carefully remove the water tank from
the humidifier power base.
Turn the water tank over, and open the valve body cover by turning it in a anti-clockwise
direction.
Fill the tank with clean water.
Close the valve body cover.
NOTE: There is a white silicone ring which must not be loosened when filling the
water tank with water.
Replace the water tank on the humidifier power base.
Replace the lower end of the mist delivery hose into the top of the water tank cap.
When there is no water in the water tank, the humidifier power base will stop working, and
an indicator light will change from green to red. Should this occur, switch off the mist fan
and re-fill the water tank with water so you can continue to use the mist function as and
when desired.
Tilt Adjustment
The tilted angle on the fan can be adjusted to suit the user. Push downward from the top
of the grill or pull upward from the bottom of the grill.
CAUTION: The fan should always be switched off when making this adjustment.
Check that the fan control switch is set to the off position before plugging into the mains
supply.
Place the fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making sure the speed control is at off position.
A
“beep” sound will be heard indicating that the mist fan is connected to the power. The
POWER indicator light on the main control panel will illuminate. The mist fan can now be
switched on either on its main control panel or by the remote control.
