Assembling your fan Continued
Place the humidifier power base onto the base.
Remove the fan blade nut and the rear grill lock nut from the motor shaft spindle. Fit the
rear grill into place by positioning on the location pins. Secure the rear grill to the motor
body with the rear grill lock nut.
NOTE: The handle on the rear grill must face upwards
NOTE: Do not force or over tighten the rear grill lock nut
Assembling your Fan
The grove in the centre of the fan blade aligns with a T-Bar on the motor spindle to ensure
correct positioning. Secure the fan blade in place with the fan blade nut by turning it anti-
clockwise. Check that the fan blade rotates freely by turning it with your hand.
NOTE: The fan blade nut is self-tightening; do not force it.
Lift out all locking clips and remove nut & screw at the bottom of the the front grill.
Place the front grill into position and secure it by fastening the locking clips over the outer
rim. The screw and nut at the bottom of the grill must be fitted.
