Celluon magic cube, Руководство пользователя

Страница: 8 / 18

Bluetooth connection instruction
1. Power on Magic Cube
2. Blue LED will blink in steady interval,
an indication that the device is ready to pair.
When Blue LED indicates one long, followed by two quick blinks, the device is searching
for previously paired device within its proximity.
This will last 30 seconds. This feature is added for convenience, assuming there is a single
host device.
Upon successful pairing, Blue LED will stop blinking and become solid blue.
If Magic Cube cannot locate previously paired host device within 30 seconds, it will delete
previously stored connection information and revert to pair mode.

SPP Mode: Blue LED will blink in intervals, indicating that the device is ready to
pair
3. Upon successful pairing, Blue LED will stop blinking and become solid blue.
Please refer to the manual of host device for pairing instruction.
4. After successful pairing of host device and Magic Cube, keyboard function
is default mode.

Changing keyboard mode to mouse mode
On the keyboard, press and hold “FN” key and tap (do not press and hold the button) the
mouse cursor key, located adjacent to space bar. A green LED will indicate successful
change of mode.

Changing mouse mode to keyboard mode.
Tap only mouse cursor button once (do not press and hold the button).

Adjusting key stroke sound level

Increasing key stroke sound level
Press and hold “FN” key and press up arrow key.

Lowering keystroke sound level
Press and hold “FN” key and press the down arrow key. There are total 6 levels of sound,
including mute.

Sound level remains as adjusted when device is turned off and on. Please consider
the environment when adjusting sound level.