Celluon magic cube, Руководство пользователя

Страница: 14 / 18

Connecting via USB HID for Windows and Mac (Plug-n-play)
1) Connect the host device and Magic Cube using mini-USB to USB cable.
2) Turn on Magic Cube by slide the power button to the right (ON).
3) Successful connection is indicated by solid green LED.
Note: Windows 7 supports multi-touch mouse function. To switch from keyboard to mouse
mode, press and hold “FN” button and tap the cursor button, located adjacent to space bar.
To change back to keyboard mode, tap the cursor button once.
Additional features:
Volume adjustment (key click feedback sound) –
1. Press and hold FN and tap ‘up’ arrow to raise volume
2. Press and hold FN and tap ‘down’ arrow to lower volume
*Note: There are 6 stages of adjustments. Each adjustment requires repeated steps.
Projection keyboard brightness adjustment –
1. Press and hold FN and tap ‘right’ arrow to increase brightness
2. Press and hold FN and tap ‘left’ arrow to lower brightness
*Note: There are 3 stages of adjustments. Each adjustments requires repeated steps.
Power save mode –
1. Press and hold FN and tap BACK key to disable laser projection
2. To reactivate laser projection, tap in the operation area with 3 fingers (3 fingers must be
separated).
Switching between keyboard and mouse mode –
(Note: default mode is keyboard function)
1. From keyboard mode, press and hold FN and tap on c ursor button, located adjacent to
space bar to switch to mouse function. Blinking LED indicates mouse mode.
2. From mouse mode, tap on c ursor button to switch back to keyboard mode. Solid LED
indicates keyboard mode.
*Please note: mouse function is only available on devices that support cursor/mouse function.
Special keys –
1. Please note that not all keys displayed on projection keyboard layout correspond to input
keys on host device. For example, MENU key will not function on a host device that does not
support the MENU function. Same applies to FN and ALT function keys.