Cellularline U-COM 3, Руководство пользователя

Страница: 13 / 13

13
10. TROUBLESHOOTING
Please visit www.interphone.com for video tutorials and answers to
frequently asked questions.
10.1 Fault reset
When the intercom is not working properly, you can reset the unit:
1. Locate the Reset button at the bottom left of the Intercom button.
2. Gently insert a paper clip into the hole and press down with light
pressure. The headset will turn off.
Note:
Resetting after an error will not reset the intercom to factory settings.
10.2 Factory reset
To erase all of your settings and start fresh, the headset can be restored to
factory default settings using the Factory Reset feature.
x 3
6 sec
?
Bluetooth Mesh
Interphone U-Com 16 (Utente) Aggiungi utente
Aggiungi utente Aggiungi utente
Fine intercom
3 sec
10 sec
Setup
Bluetooth
®
Intercom - other pairings
Matching previous series. To be done with unit on on u-com 3 and with the unit off on the other
device (consult the manual of the other device for more details)
Anycom pairing for other brands (except Sena)
Anycom
pairing
Interphone
pairing
Intercom
pairing
Confi guration
menu
Mobile phone
pairing
With U-COM 3 on, enter the configuration menu by pressing the power key
for 10 seconds. Be careful not to release the button before the LED turns
blue, you will hear the message confirming activation of the configuration
menu.
Press the PHONE button twice until you hear the message “Factory reset”,
press once the CENTRAL button to confirm. A voice announcement will be
issued to confirm: “Reset headphones, goodbye”.