Cellularline U-COM 3, Руководство пользователя

Страница: 12 / 13

12
9.2.5 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can initiate an intercom conversation with
the last connected intercom by voice. When you want to start intercom, say
a word such as “Hello” loudly or blow air into the microphone. If you start an
intercom conversation by voice, the intercom terminates automatically when
you and your intercom friend remain silent for 20 seconds. However, if you
manually start an intercom conversation by tapping the Center Button, you
have to terminate the intercom conversation manually. However, if you start
the intercom by voice and end it manually by tapping the Center Button, you
will not be able to start intercom by voice temporarily. In this case, you have
to tap the Center Button to restart the intercom. This is to prevent repeated
unintentional intercom connections by strong wind noise. After rebooting
the headset, you can start the intercom by voice again.
9.2.6 Bluetooth
®
Intercom Audio Multitasking (Default: Disabled)
Audio Multitasking ( Bluetooth
®
Intercom Audio Multitasking) allows you
to have an intercom conversation while simultaneously listening to music
or GPS instructions. The overlaid audio is played in the background with
reduced volume whenever there is an intercom conversation and will return
to normal volume once the conversation is finished.
Note:
• For Bluetooth
®
Intercom Audio Multitasking to work properly, you need to
power the headset off and on. Please restart the headset.
• Bluetooth
®
Intercom Audio Multitasking will be activated during two-way
intercom conversations with a headset that also supports this feature.
• Some GPS devices may not support this feature.
• The Audio Multitasking feature can be configured through the Audio
Overlay Volume Management settings.
9.2.7 Audio Source Priority (Default: Intercom)
Enables you to reverse the priority between the Intercom and Music
function. Refer to Chapter 8.1 for details.
9.2.8 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to
HD quality. HD Intercom will become temporarily disabled when you enter
into a multi-way intercom. If this feature is disabled, the two-way intercom
audio will change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than normal
intercom.
• HD Intercom will become disabled temporarily when Bluetooth
®
Intercom
Audio Multitasking is enabled.
9.2.9 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations.
Three-Way Conference Phone Call with Intercom Participant will not be
available if HD Voice is enabled.
Note:
• Refer to the manufacturer of your Bluetooth
®
device that will be connected
to the headset to see if it supports HD Voice.
• HD Voice is active only when Bluetooth
®
Intercom Audio Multitasking is
disabled.
9.2.10 Voice Prompt (Default: Enable)
You can disable voice prompts by software configuration settings, but the
following voice prompts are always on.
- Headset configuration settings menu, battery level indicator, speed dial.