Cellularline Interphone EDGE, Руководство пользователя

Страница: 11 / 13

ENGLISH - 21 ENGLISH - 22
When the signal strength is not enough weak to activate the re-tune to
an alternative frequency, the listening quality could be decreased due to
the low quality of signal. FM stations listening is strongly influenced by the
environment (EMC noise, poor signal coverage, etc).
During the FM radio listening, it is possible to go in Standby mode (led BLUE (6) flashing-
menu “INTERCOM”), pressing the MFB (1) button.
7 – Music streaming
With EDGE is possible to listen to music from an A2DP Bluetooth® device (smartphone,
MP3 player, etc..). To play music from these devices is necessary to pair the EDGE unit
with the music source device (Chapter 5.1).
7.1 Music play
With EDGE in Standby mode (led BLUE (6) flashing), push DOWN button for three times
and then press the MFB (1) button to activate the “MUSIC STREAMING” menu.
Play/Pause
Push the MFB (1) button until the beep to
play/pause the music.
Track select
Press UP (2) or DOWN (3) button to select
the previous or the next track.
During the music listening, it is possible to go in Standby mode (led BLUE (6) flashing-
menu “INTERCOM”), pressing the MFB (1) button. To resume the music listening it will be
necessary to go again into “MUSIC” menu, as described at beginning of this chapter.
6 – FM radio
EDGE includes an integrated FM RDS radio receiver with memory to store eight radio stations.
To start the FM radio listening, with EDGE in Standby mode (led BLUE (6) flashing), push
DOWN (3) button for two times and after press the MFB (1) button to activate the “FM
RADIO” menu.
Frequency scan
Press UP (2) button to start frequency scan
up (from 88 MHz to 108 MHz).
Press DOWN (3) button to start frequency
scan down (from 108 MHz to 88 MHz).
Memory scan
Press UP (2) button until the beep to select
the next FM station memorized.
Press DOWN (3) button until the beep to
select the previous FM station memorized.
Store FM station
Press MFB (1) button until the beep, to save
the FM station you are listening.
Press UP (2) or DOWN (3) button to select
the memory nr (from nr.1 to nr.8).
Press once MFB (1) button to confirm the
memory nr (from nr.1 to nr.8).
“RDS” allows these features:
● allows the EDGE receiver to re-tune to a different frequency, providing the same
station when the first signal becomes too weak.
● when EDGE re-tunes to a different frequency, the vocal help (TTS) will speak the
name and the frequency of the FM station.