CelloTrack T Installation Guide
CelloTrack T Installation Guide
Page 16 of 20
Copyright © 2014 by Pointer Telocation, Ltd.
3.8
Wiring Guidelines for the CelloTrack Power
3.8.1
Connecting Wires
It is recommended to use the following met
hod when connecting wires, such as connecting
CelloTrack Power to Constant or to PTO/Ignition (refer to the full wiring diagrams in the
following sections):
Split the wire, insert a fuse holder wire through, and twist around.
Use electric tape on the splice to cover the connection.
Secure the connection with tie-wrap to ensure the connection does not come undone.
Using this method, you will create a good clean connection between two wires, limiting
future potential service visits.
3.8.2
Connecting to Ground
Black wire connects to ground (GND).
Use a ring terminal with lock washer and
self tapping screw.
Ground connection should always be made
to the vehicle chassis.
