CelloTrack T Installation Guide
CelloTrack T Installation Guide
Page 14 of 20
Copyright © 2014 by Pointer Telocation, Ltd.
3.6
Mounting the CelloTrack Device
Perform the following steps in order to mount the CelloTrack 3G device correctly:
1.
Remove the CelloTrack device from the cradle.
2.
Take the screws (provided) and/or double-sided tape (provided) and mount the cradle
to the asset you wish to track. The location where you choose to mount the cradle
should have a clear view of the sky.
3.
Replace the CelloTrack device securely back in the cradle ensuring that the cradle
tamper switch matches the unit tamper switch.
------------------------------------------------------------------------------------------------
CAUTION:
Properly snap the device into the cradle by aligning the tamper switches of
the unit and the cradle. Please be aware that the unit must be correctly fastened in its
cradle in order to be switched on.
------------------------------------------------------------------------------------------------
4.
Attach and secure with cable ties.
Securing the unit to the
cradle with cable tie
Screw and plastic bar
which hold the cradle
tamper switch in its
non-active position
