Discharge
conveyor and
back loader are
not working.
-No oil in the
hydraulic system.
- Oil leak in hydraulic
system
- Command is
defective
- Hydraulic pump is
defective
- There is water in the
hydraulic system
- Check the oil level.
- Check hydraulic connections and hoses.
-
Check the electrical wiring and the
command.
- Change the hydraulic pump.
- Change the hydraulic oil.
Although PTO
Works, Augers
do not run.
- PTO is defective
- Gearbox is defective
- Change the PTO.
-
Contact the nearest authorized service.
Augers
are
working
slow
and noisy than
normal.
- Gearbox is defective
- Contact the nearest authorized service.
Discharge
conveyor is not
working.
- Band is stucked.
- Band mile is cutted
the wedge.
- Band hydro motor is
defective.
- Hydraulic system is
defective
- Speed control valve
is closed on discharge
conveyor.
-Make sure that there is no feed between
the band.
- Change the mile wedge.
- Change the band hydro motor.
- Check the hydraulic system and hose,
hydraulic pump.
- Open the speed level valve.
