WEIGHING SYSTEM (Optional)
If weighing system is available on your machine, Please check the weighing system in addition
to the instruction manual provided with this guide.
ADJUSTMENT OF COUNTER BLADES
Usage of counter blades is recommended when mixing and chopping lightweight substance.
While performing ordinary mixing, counter blades are not necessary. Use counter blades only
when necessary, in other words when the material in the reservoir is rotating at same speed
as auger. Continuous use of counter blades might cause the mixed material to overflow from
the reservoir.
To make the stable knife adjustments remove the locking pin in the
figure. Insert the locking pin again after you set the blade depth
according to the desired cut size. The optional hydraulic lift models knife
adjustment is made by the control levers.
ROTATION SPEED of AUGER (In some models)
Some models have an option to set auger
speed of rotation. Auger speed is adjusted in
two stages. This requires you to turn the handle
on the front of the machine. It shortens the
time needed to prepare bait of choice in high
gear, do not forget the need to increase the
power of the machine.
UNLOADING
