1.
Be sure to turn off the machine's conveyor door.
2.
To run the machine use 540 RPM of PTO (Electric motors on some models) starting to
feed to loading. Make sure that your machine is working in a flawless manner.
3.
Firstly, load the low-destiny straw, hay etc. Feed such that want to shorten the length
can be cutting process by mixing a certain time.
4.
Load the big bales in the middle of two augers, toward the center of the machine.
This will ensure that as soon as the realization of large bales more quickly by opening
the chopping.
5.
Secondly, load the corn silage, pulp, pellets etc. into the machine.
6.
In third stage, load the such as vitamins, minerals, premix, cereals ruffle.
7.
Finally, the mixture must add excipients such as water and oil.
NOTE:
The amount of food in the subsequent mixing time inserted into the machine after all
feeding machine and can be varied according to the properties and density of the feed. The
position of the fixed blade can be replaced to increase the chopping effectiveness of tall feed.
Fixed blade cutting machines will be so much activity if you enter more into. Do not forget the
usage of fixed blade aim of further increasing for chopping; it would be more power usage.
MINERAL / PREMIX FILLING FUNNEL (Optional from 8m
3
to 52m
3
)
Some models mixed into powdered feed mixture of mineral premix and so on. There are
mineral reservoirs on the back of the machine to easily add ingredients. This type of feed
additives powdered should be mixture after you add all components of the ration into
machine.
