44
Function: Target volume manager
This function allows unmanaged and already assigned volumes in a target.
To assign a volume to the target click a volume with a button "Add". Similarly to
remove already assigned volume from the target click "Remove".
In certain circumstances you may need to adjust the LUN of the volume you are
about to add. Normally, however, the LUN assignment is taken care of for you
automatically. You should leave the default values. The RO option means Read
Only, if it is turned on the LUN will be visible as a write protected disk.
To switch the RO option when it's disabled, you must first remove the volume from
the target and then add it again setting the flag as desired.
Function: CHAP user target access
Add CHAP users that are granted to access to the Target Server.
If you enable CHAP user access authentication but don’t select any users
to have access, then nobody will have access to the Target Server.
Function: Target IP access
You can assign network classes or specify individual IP addresses that are permitted
or denied to access the target. Entries should be delimited by commas.
