16
With Ctrl + ALT + DEL the Celeros XL Series host computer will be shut down and restart,
while CTRL + ALT + S shut it down. Please be careful with this option when users are
connected.
ESC menu
♦
Boot menu is available by pressing ESC after POST (Power-on self-test) during
the initial start of Celeros XL Series system. After pressing ESC, there will appear
menu with possibility of launching Celeros XL Series in different procedures of
work or memory testing:
♦
Single
-
system launch with (kernel) for one CPU,
♦
SMP
-
system launch with (kernel) for more CPU's system,
♦
x86
-
system launch with restrictions of 4GB RAM(this procedure should work
on every unit with CPU better than 386 and with CPU C3),
♦
Single (Intel I/OAT support)
-
system launch in procedure with one CPU,
♦
SMP (Intel I/OAT support)
-
system launch in multiple-CPU,
♦
Memtest
-
after choosing this option, memory of the system, where Celeros XL
Series is installed, will be tested, Apart from test, there are also available
information about the memory itself and its settings,
♦
RESCUE_MODE
-
in this option only drivers, which enable access to the net,
are loaded (if there is a need to connect using remote support).
5
Manage XL Series using browser functions
On the following pages, we will thoroughly describe every function of Celeros XL Series.
The functions are divided by menu options, which are located at the top part of the screen.
5.1 SETUP
In this place you can manage network interfaces, administrator settings, hardware RAID
controllers, create disk array using software RAID, Fiber Channel, iSCSI initiator, hardware
and GUI settings.
5.1.1 Network
Here you can find the utility containing network interfaces. Click on Interface name to see
more information about selected interface.
Function: Server name
Please enter server name to clearly identify your server.
In the field “Comment,” please enter short description of your server.
Server Name and Comment rules:
Please make sure the server name is unique in your network.
Select a server name that clearly identifies your new server.
Please do not use spaces and special characters like:~!@#$^&()+ []{}*;:'".,%|<>?/\=`_
Server Name cannot consist of digits only.
Comment is not displayed in some systems.
