CEL-MAR ADA-4040A, Руководство пользователя

Страница: 5 / 16

2.3. ISOLATION
Converter ADA-4040A has 2-way or 3-way galvanic isolation on the levels 1kV= or 3kV=, depend on version described in section
VERSIONS.
Fig 2. Isolation structure
3. INSTALLATION
This chapter will show you how to use and connect ADA-4040A to RS485, RS422 network and power supply.
In the purpose of minimization of disruptions from environment is being recommended to:
- apply multipair type shielded cables, which shield can be connected to the earthing on one end of the cable,
- arrange signal cables in the distance not shorter than 25 cm from powering cables.
- apply cable of adequate cross-section due to voltage drops for converter powering,
- use suppression filters for powering converters that are installed within a single object.
- not supply converter from power circuit device that generates large impulse interference such as transmitters, contactors.
3.1. ASSEMBLING
The cover of ADA-4040A converter is adapted to assembly on TS-35 (DIN35) rail. To install converter you should mount device on the
rail upper part of the cover then press bottom part to hear characteristic „Click” sound.
3.2. COMPUTER CONNECTION
To connect ADA-4040A converter via the RS1 port to computer equipped with RS-232 or USB interface, is needed additional
converter e.g. ADA-I1040 RS232 to RS485/RS422 converter or ADA-I9140 USB to RS485/RS422 converter (or other), which is
connected to RS2 port of ADA-4040A.
The ways of connections of ADA-4040A to PC are shown below.
Fig 3. 4-wires connection of ADA-4040A to PC by the use of ADA-I1040 - RS232 to RS485/RS422 converter
Fig 4a. 4-wires connection ADA-4040A to PC by the use of ADA-I9140 USB to RS485/RS422
5
ADA-4040A
POWER
10 - 30VDC
RS2
RS485/RS422
RS1
RS485/RS422
POWER
10 - 30VDC
RS1
RS485/RS422
RS2
RS485/RS422
3-WAY ISOLATION 2-WAY ISOLATION
(5) GND
GND
(2) Rx
(3) Tx
RS232
Connector
DB-9F/DCE
Screw
connector
RS485 / RS422
RS485(4W)
RS232
connector
DB-9M/DTE
ADA-I1040
GND (5)
Tx (2)
Rx (3)
Rx+
Rx-
Tx+/ A
Tx-/ B
Tx+ / A
Tx- / B
Rx+
Rx-
RS1 screw
connector
RS485 / RS422
Tx+ / A
Tx- / B
GND
Rx+
Rx-
RS2 Screw
connector
RS485 / RS422
ADA-4040A
PC
GND
USB
USB
connector
Screw
connector
RS485 / RS422
RS485(4W)
USB
connector
ADA-I9140
USB
Rx+
Rx-
Tx+/ A
Tx-/ B
Tx+ / A
Tx- / B
Rx+
Rx-
RS1 screw
connector
RS485 / RS422
Tx+ / A
Tx- / B
GND
Rx+
Rx-
RS2 screw
connector
RS485 / RS422
ADA-4040A
PC