18
Ceiec Electric Technology
Properties
icon to bring up the Site Properties dialog box.
In this example,
P1
of the PMC-1302 ESG is used, and
Site 1
has been configured with the following
parameters:
1.
Drive Type = MODBUS - RTU Protocol Master Site Driver,
2.
Polling Mode = Serial
3.
Port Type = Ethernet
4.
IP = 192.168.0.127
5.
Port = 20000 (for P2 of PMC-1302ESG)
Select
PMC-660
on the right-hand pane under the
Device Name
column and then click on the
Properties
icon on the Tool Bar to bring up the
Device Node Properties
dialog box. Change
Type
to
PMC660,
Comm ID
to 100 and then click OK to save and exit the dialog box.
