CEI TX1-SOM, Справочное руководство, Страница: 11 / 11

I want to plug one 4x PCIE - 2.0 board into the PCIE socket, but there is one RJ45 nearby. Is this an issue?
There shouldn ’ t be any issues connecting to the PCIe slot, even with the RJ45 connection nearby.
How do you connect to the J19 Debug Header? Do you use a daughter board?
We have never used J19. The pinout is readily available online, so we suggest finding a compatible cable or building one.
Which port of the carrier is disposed as video input and which one could be used as output? If I use the carrier board HDMI port, can I
record a 4K 30fps video stream?
The only video input is the CSI port. We suggest this board for HMDI etc:
https://blog.zhaw.ch/high - performance/2016/05/20/4k - hdmi - to - csi - interface - for - tx1 - evalboard/
How many GPIOs dedicated to managing drivers are there? Can I extend the USB 3.0 port to two or three more USB ports?
Any USB extender will allow for more USB ports. For detailed information, please review our reference guide:
http://coloradoengineering.com/wp - content/uploads/2016/10/Reference - Guide_TX_Final.pdf
Is there a difference of the processor part compared to the architecture of the TX1? For example, if we have an algorithm running on
the TX1, is it possible to transfer this code easily to your platform?
Our Jetson TX1 and X - Carrier run off the same processor as the Jetson Kit - straight from NVIDIA. You should be able to port your code
over without any issues.
X - Carrier Board | Rev B
PAGE 10
REFERENCE GUIDE | Frequently Asked Questions
Frequently Asked Questions | Continued