Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
6
PROGRAMMING CONTINUED…
3.06
If the telephone must dial a
PBX or other access number
to begin a call,
enter
# 1 8 followed by the desired
number.
If this is not a desired feature, please
proceed to section 3.06.
This PBX/Access number may range from 1-11 digits.
When the CALL button is pressed the telephone will automatically dial the
PBX/Access number first, followed by an approximate one (1) second pause,
and then dial the auto-dial number (programmed in the next section-3.06). A
“1” must be entered under Digit 8 in section 3.08 in order to activate this
feature.
EXAMPLE:
Enter
# 1 8
9. This will cause the phone to automatically dial the
number “9”, when the CALL button is pressed. This will be
followed by an approximate one (1) second pause and then the
auto-dial number will be released.
#18 __ __ __ __ __ __ __ __ __ __ __
3.07
In order to program an
auto-dial number, enter # 1 9, followed by the desired
number.
This number may range from 1-11 digits. When the CALL button is
pressed, this number will automatically dial out. Any PBX/Access number
previously programmed will dial out first, followed by an approximate one (1)
second pause, followed by this auto-dial number.
Example:
Enter
# 1 9
5 5 5 1 2 1 2. This will program the telephone to
automatically dial the number 555-1212, when the CALL button
button is pressed.
#19 __ __ __ __ __ __ __ __ __ __ __