ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
7
PROGRAMMING CONTINUED…
EXAMPLE:
Enter #00 0 _1 _0 _6_ 0 _1 0 _0 0 _5
Phone will be set as follows:
DIGIT 1 .. ALWAYS 0
DIGIT 2 .. INCOMING CALLS ALLOWED
DIGIT 3 .. ALWAYS 0
DIGIT 4 .. 6 MINUTE TIME OUT FOR SPEED DIALING
DIGIT 5 .. ALWAYS 0
DIGIT 6 .. ALWAYS 1
DIGIT 7 .. ALWAYS 1
DIGIT 8 .. DO NOT DIAL PBX NUMBER IN LOCATION #91
DIGIT 9 .. ALWAYS 0
DIGIT 10 .250ms WINK
3.7
LOCATIONS #01-#90
(
SPEED DIALING
)
If repertory/speed dialing is needed, enter the desired numbers as described in this
section. There are forty (90) memory locations available (#01-#90). The
number(s) can range from 1-11 digits in length.
Enter
the
# Key,
the intended
memory location
,
and the desired speed dial number
. When the phone is
placed into operation, the user will simply dial the two-digit memory location
code, and there is no longer a need to dial the # key first. This will cause the
corresponding speed dial number to automatically dial out.
EXAMPLE:
Enter #3018005551212 in the programming sequence. When in normal operating
mode, the user dials 30 and the phone will Speed Dial - 1-800-555-1212.
Be sure to log your entries in the speed dial table on the next page for
future reference.
