2 / 32
CCBU40 COMPACT CONTROLLER BOARD - PRODUCT AND WARRANTY INFORMATION
Version 1.21
I.
CAUTION: READ BEFORE OPENING
For safety purposes these instructions must be read before use of this product.
This product presents risks of severe injury or death due to burn hazards, electric shock, and sharp edges.
Only qualified personnel should work on or around this equipment and only after becoming thoroughly familiar
with all warnings, safety notices, and procedures contained herein.
The successful and safe operation of this equipment is dependent on proper handling, installation and operation.
A "qualified person" is one who is familiar with the installation, construction and operation of the equipment and
the hazards involved. In addition, he/she has the following qualifications:
•
is trained and authorized to energize, de-energize, clean, and ground equipment in accordance with
established practices,
•
is trained in the proper care and use of protective equipment in accordance with established safety
practices,
•
is trained in the soldering process and wiring of connectors,
•
is familiar with the EMC and safety requirements.
To comply with the safety and EMC regulation, the user must install and configure the product correctly.
Qualified person, who is familiar with the EMC and safety requirements, must install the product and is
responsible for ensuring that the end product complies with the relevant laws in the country, where it is going to
be used. Special care should be taken regarding electrical safety since the product is capable of providing high
voltages.
II. INSPECTION UPON RECEIPT
This product has been inspected and shown to operate correctly at the time of shipment, as verified by the
Factory Verification Form that accompanies the product.
Immediately upon receipt of the product, it should be inspected carefully for any signs of damage that may have
occurred during shipment. If any damage is found, a claim should be filed with the carrier.
The package should also be inspected for completeness according to the enclosed packing list. If an order is
incorrect or incomplete, contact your distributor.
