IMS 100 Pro
English
2
© CEDES | V 4.0
1. About this manual
This installation and operation manual in English, with
metric measurements is the
original version
.
The version number is printed at the bottom of each page.
To make sure you have the latest version, visit www.cedes.
com where this manual and related documents can be
downloaded.
1.1 Measurements
Measurements are, if not stated otherwise, given in mm
(non-bracketed numbers) and inches (numbers in brackets).
1.2 Related documents
IMS 100 Pro datasheet
001 154 en
IMS 100 Pro installation guide
114 584
1.3 CEDES headquarters
CEDES AG
Science Park
CH-7302 Landquart
Switzerland
2. Safety information
IMPORTANT
READ BEFORE INSTALLATION!
The IMS 100 Pro was developed and manufactured using
state-of-the-art systems and technologies. However, injury
and damage to the sensor can still occur.
To ensure safe conditions:
Read all enclosed instructions and information.
Follow the instructions given in this manual carefully.
Observe all warnings included in the documentation
and attached to the sensor.
Do not use the sensor if it is damaged in any way.
Keep the instruction manual on site.
Important: LASER RADIATION HAZARD
The IMS 100 Pro is classified as Class 1 laser product.
Complies with IEC 60825-1 Ed. 3. 2014-05, and with 21
CFR 1040.10 and 1040.11 except for conformance as
described in Laser Notice No. 56, dated May 8, 2019.
Important:
The IMS 100 Pro must be used in conjunction with a door
protection system (e.g. light curtain, mechanical edge, etc.).
When the IMS 100 Pro is used with these devices, it is the
responsibility of the installer to ensure that, on completion,
the installation complies with all the relevant codes and
regulations that pertain to infrared and photoelectric door
protection devices!
CEDES AG reserves the right to modify or change technical data without prior notice.
Contents
1.
About this manual
2
1.1 Measurements
2
1.2
Related documents
2
1.3
CEDES headquarters
2
2.
Safety information
2
2.1
Non-intended use
3
2.2
Hazards of laser radiation
3
3.
Symbols, safety messages
3
3.1
Safety messages categories
3
4. Introduction
4
4.1
Features of the IMS 100 Pro
4
4.2
IMS 100 Pro-L
4
4.3
Delivery package
4
5. Installation
5
5.1
Switch OFF main power
5
5.2
Possible sensor positions
5
5.3
Center opening door
5
5.4
Right side-opening doors
6
5.5
Left side-opening doors
7
5.6
5 degree bracket
9
5.7
If needed - removal of expanding rivets
9
6.
Electrical installation
9
6.1
Cable and electrical connection of IMS 100 Pro 9
6.2
Output logic
9
6.3
Timeout function
10
6.4
Integrating of IMS 100 Pro
10
6.5
Power-up and test for proper function
10
7.
Timing diagram
11
8.
LED status description
11
9.
Trouble shooting
12
10. Maintenance
12
11. Disposal
12
12.
Technical data
13
13. Dimensions
26
