Cedarshed Bayside B84DD, Руководство пользователя

Страница: 12 / 25

12
FIGURE S2
FIGURE S1
FIGURE S3
Attach 2" x 3" Wall Headers to the 4 solid wall panels that do not have one with 3 - 3" screws as shown (FIGURE S2).
Layout all wall and door panels flat on the ground around the completed floor system as shown (FIGURE S1).
Completed Floor System
Attach the Wall Headers to the
Wall Panels with 3" screws
Starting from a rear corner, raise and attach an end wall panel to the floor with 3 - 3" screws (FIGURE S3).
Attach the Wall Headers to the
Wall Panels with 3" screws
Make sure Base Plate
of Wall Panel is flush
with Floor Boards
Before beginning to mount the wall panels onto the floor, a decision has to be made as to the location of the door and
window. Once these are determined then we can proceed with mounting the wall in there desired positions.
For our instruction example we have chosen to have the window and door located on the wide (8 ft [2.4m] low wall
side.
B84DD
P-2
346
G
BW
-003
P-23
46G
P-23
46G
BW
-003
BW
-00
3
BW
-00
3
P-2
346
G
Siding must not be sitting
on the floor panel, it should
be on the outside as shown
Wall panel frame
must be flushed
with floor panel
3" screws
between
wall studs
Part Number Description Size or Type # of Pcs. CODE
WALL PARTS AND PANELS
P-23
13K
P-23
13K
C-D
F-01
2
C-D
F-0
08
C-D
F-0
08
C-B
W-
001
C-B
W-
001
C-D
R-0
01
C-D
R-0
01
P-2346G Headers 2 x 3 x 46 ½" 4
BW-003 Solid wall panels 46 ½" x 73 ¼" 4 B-003
P-2313K Header 2" x 3" x 13 3/4" 2 P-2313K
C-DF-012 Door Frame 65 1/2" 1 C-DF-012
C-DF-008 Door Frame 72 1/4" 2 C-DF-008
C-BW-001 Blank Wall 13 3/4" x 73 1/4" 2 C-BW-001
C-DR-001 Door 31 1/16" x 71 3/4" 2 C-DR-001
P-2346G