18
INSTALLING LOGS
Fig. 15 - Installing Log Set
IMPORTANT
: Make sure log does not cover any
burner ports (see Fig. 15). It is very important
to install the logs exactly as instructed. Do not
modify logs. Use only logs supplied with heater.
STEP 1
: Install the log 1 onto the two slots in
middle plate.
All logs
STEP 2
: Install log 2 onto two slots in left plate.
Install log 3 onto the two slots in right plate.
STEP 3
: Install log 4 onto two slots in front plate.
WARNING
: Failure to position the parts
in accordance with these diagrams or failure
to use only parts specifically approved with
this heater may result in property damage
or personal injury.
CAUTION
: After installation, and
periodically thereafter, check to ensure that no
flame comes in contact with any log. With the
heater set to high, check to see if flames
contact any log. If so, reposition logs
according to the log installation instructions
in this manual. Flames contacting logs will
create soot.
1
1
2
3
1
2
3
4
1
2 4
3
5
6
STEP 4
: Install the recessed holes bottom of log 5
onto the pins on log 2 and 4. Insert the
recessed holes bottom of log 6 onto the
pins on log 1 and 3.
