13.
REPETITIVE MODE:
This advanced feature of the CED7000 is ideal for PPC, UIT, Police, & Military qualification type
courses where a series of simulated “exposures” at fixed intervals are required. This function simulates
the effect of a turning target system where the “Face” and “Edge” times are selected by the user, as well
as the desired number of times it is to be repeated.
Select MODE from the MENU and then the REPETITIVE Mode. The user then selects a given PAR
time, followed by a specified EDGE time and then the number of times it is to be
repeated. Use the right/left directional keys to move forward or backward and the up/down directional
keys to select value for each setting. Keep in mind that the selected number of REPEATS is added to
the first activation. Therefore, if 3 repeats are selected, the timer will run the first Par time and then
repeat it three times, making a total of FOUR Par (Face) times.
The start of the selected “Face” period is indicated by the pressing of the “Start” button and the sound-
ing of the buzzer. If the Auxiliary jack is in use, a 5.0 volt D.C. impulse will be emitted in direct syn-
chronization with the buzzer, which allows the user to activate a real turning target replay if so desired.
At the end of the set Par time, the buzzer (and 5.0 volt impulse if in use) will beep for 0.30 seconds
indicating the end of the “Face” period, and the beginning of the “Edge” period. After the selected
EDGE time expires, the sequence will start again, and continue doing so until it has completed the full
amount of repeats that have been pre-set into the timer.
The “Repeats” will be displayed in the STRING column during the “Edge” time, which in turn will
display as a countdown in the same fashion as a normal delay does. During the “Face” time, the timer
will display shots received in the SHOT column.
* A programmed function may be stopped (interrupted) at any time during the running of the
program by pressing the REVIEW button. However, pressing the REVIEW button will return
the program to the beginning.
COMBINED COMSTOCK MODE:
The CED7000 features the ability of combining several “Comstock” scores cumulatively. Designed
for situations where the user wants to add the time of two or more strings together, but require separate
start beeps. When the Timer is set in this mode, it will restart from the exact time and number of shots
last displayed on the timer prior to restarting it and will continue to accumulate both from that point
onward. The user can re-start the timer as many times as desired, with each new start resulting in a
continued cumulative shot and time recording. To re-start the timer from zero, press the “CLEAR” but-
ton TWICE. To end the “Combined Comstock” function, enter the preference MENU, select MODE,
and then select “COMSTOCK” & press enter or select CLEAR MODE from the Menu and press
ENTER. This will clear any setting, function, or mode in current use and return the timer to Comstock
ready mode.
