32
33
POWER ESPRESSO 20 BARISTA PRO
3.
Insert the portafilter in its position and make sure it is securely fitted.
4.
Place a large container (approx. 2 L) on the cup-holder tray. Make sure it is big enough so
that water coming out from the water tube, nozzle and steam tube can fall inside it.
5.
Press and hold the Hot water button for 5 seconds for the machine to enter Autocleaning
mode.
6.
Turn the steam knob to the MAX. position. Hot water with descaling product (or the used
one) will be emitted through the portafilter spouts and hot water and steam tubes. This
process will take from 10 to 15 minutes, then the coffee machine will turn off.
7.
Once it has finished, fill the water tank with clear water and repeat these steps until there
is no more descaling product.
8.
Clean the water tank and the drip tray.
Notes:
– During the Autocleaning process, the pump will turn on and off intermittently, this is normal
and does not involve malfunction.
– During the Autocleaning process, the steam knob must not be set at “0”. The machine will
beep once to remind it must be turned to the MAX. mark in order to clean the steam tube.
6. TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Water leaks from the bottom
of coffee maker.
There is too much water in
the drip tray
Empty and clean the drip tray
The coffee maker is damaged Contact the official Technical
Support Service of Cecotec
Water leaks from the
portafilter holder
There is some coffee powder
on filter edge
Clean the filter and
portafilter holder
Water leaks from the
portafilter holder
There is some coffee powder
on filter edge
Clean the filter and
portafilter holder
Coffee tastes like acid/
vinegar
The device has not been
cleaned properly after
descaling
Follow the cleaning and
maintenance instructions to
clean the device properly
Coffee powder has not been
stored in an adequate place
and has turned bad
Use fresh coffee powder, or
store unused coffee powder
in a cool, dry place. After
opening a package of coffee
powder, reseal it tightly.
The coffee machine does not
work
Connection between the
device and the power supply
may be defective
Check the power supply and
the cord
The steam knob does not
froth
The container used is not of
the correct size or shape
Use a high and narrow cup
You have used skimmed, soy,
rice or other type of milk
Use whole milk
All the light indicators turn
on red and flash
There is not enough water in
the water tank
Fill the water tank until the
device shows no error
While brewing coffee, the
single and double espresso
buttons flash red and no
coffee is brewed or only
drops
The coffee filter is clogged
Do not grind coffee too
fine and do not exceed the
indicated quantity of coffee
powder
7. TECHNICAL SPECIFICATIONS
Model: Power Espresso 20 Barista Pro
Product reference: 01577
Power: 2445 - 2900 W
Voltage and frequency: 220-240 V, 50 Hz
Made in China | Designed in Spain
ENGLISH
ENGLISH
