42
ENGLISH
button and dispense liquid until the tank is empty.
Fill the tank with water up to the “MAX” mark and repeat steps 4 and 5 at least 3 times. Then,
continue with step 7.
5. TROUBLESHOOTING
Error
Cause
Solution
Water leaks from the
bottom or the water
tank’s lid.
The water tank is not
properly assembled.
Insert the water tank correctly into
the water intake on the appliance’s
base.
The water level in the
tank exceeds the “MAX”
mark.
The water level in the tank should lay
between the MIN and MAX marks.
Water leaks from the
bottom of the coffee
maker.
There is too much water
in the drip tray.
Clean the drip tray.
The coffee maker does
not work properly.
Contact the official Technical Support
Service of Cecotec.
Water leaks from the
edge of the filter.
There is ground coffee
on the edge of the filter.
Clean the filter edge.
Acid (vinegar) taste in
coffee.
The machine has not
been cleaned properly
after cleaning the
mineral deposits.
Clean the coffee maker as explained
in the Before use section.
Ground coffee has been
stored in a hot, wet
place for a long time.
Coffee has turned bad.
Use fresh ground coffee, or store the
it in a cool, dry place. After opening
a package of ground coffee, reseal it
tightly and store it in a refrigerator to
maintain its freshness.
01503_Cumbia Power Expresso 20 _Manual_YV_02020218.indd 42
01503_Cumbia Power Expresso 20 _Manual_YV_02020218.indd 42
18/2/20 15:56
18/2/20 15:56
