POWER ESPRESSO 20
41
ENGLISH
How to heat drinks with steam
The steam exit (without the steam tube) can be used to heat beverages like hot chocolate,
water, or tea.
Remove the detachable tank, open the tank cover, and fill it with water. The water level should
not exceed the “MAX” mark in the tank. Install the tank back in the appliance.
Connect the coffee machine to a power supply. Make sure the steam extraction knob is off.
Press the steam button and the light indicator will start blinking. Wait until the light stops
blinking.
Remove the steam tube from the steam exit.
Introduce the steam exit in the drink you wish to heat. Slowly turn the steam knob
counterclockwise to release steam.
When the required temperature is reached, turn the steam knob to the off position.
Press the steam button again to turn the appliance off.
4. CLEANING AND MAINTENANCE
Turn off, unplug the appliance, and let it cool down before cleaning it.
Clean the housing of the appliance with a wet cloth. Empty the water tank and drip tray, and
clean them together with the removable grid. Dry them thoroughly.
Note: Do not clean the appliance with alcohol or solvents. Do not immerse the main body of
the appliance in water.
Clean the portafilter and the stainless-steel filter under running water.
Mineral deposits cleaning
Clean the mineral deposits every 2-3 months in order to ensure that the coffee maker operates
properly, that the internal piping is clean, and that the flavour of the coffee is good.
Fill the tank with water and descaling liquid up to the “MAX” level (the proportion of water
and descaling liquid is 4:1). Citric acid can also be used (available in chemist’s or drug stores)
instead of descaling liquid (100 parts of water and 3 parts of citric acid).
Insert the stainless-steel filter into the filter holder without ground coffee in it and attach it to
the main body as indicated in previous sections. Place a jug under the filter holder. Make sure
the steam extraction knob is off.
Press the coffee button and wait until the indicator light stops blinking. Then, press the coffee
button and dispense about 500 ml (20 fl. oz.) of liquid. Press the coffee button again to stop
and wait for 5 seconds.
Press the steam button and wait until the light indicator stops blinking. Turn the steam knob
counterclockwise to release steam for 2 minutes. Then, turn the steam knob to the off position
and press the steam button again to stop. Allow the appliance to cool down for 15 minutes.
Restart the unit and repeat steps of 4 and 5 at least 3 times.
Press the coffee button and wait until the indicator light stops blinking. Then, press the coffee
01503_Cumbia Power Expresso 20 _Manual_YV_02020218.indd 41
01503_Cumbia Power Expresso 20 _Manual_YV_02020218.indd 41
18/2/20 15:56
18/2/20 15:56
