cecotec CONGA ROCKSTAR 1500 ULTIMATE ERGOFLEX, Инструкция по эксплуатации

Страница: 23 / 32

CONGA ROCKSTAR 1500 ULTIMATE-ERGOFLEX | 23
ENGLESK
3. PRODUCT ASSEMBLY
Vacuuming tube and suction base assembly
To install the suction base into the vacuuming tube, align both of them
making sure the tab on the suction base matches the guides on the tube,
and introduce one into the other until they are firmly fixed. To disassemble
them, press the suction base release button and pull from the vacuuming
tube while you hold the suction base.
Warning
When assembling these 2 parts, make sure the handle and the brush are
facing the same direction.
Use the Flex tube to reach and vacuum dirt from the most inaccessible
zones. Press the Flex button to bend the tube.
Fig. 2/2.1/2.2
Battery assembly
Introduce the battery in the slot located in the handheld vacuum cleaner
following the guides.
Once it is introduced, it will click into place. Move it slightly to ensure it is
properly assembled in place.
Note
Take the battery out and store it in a safe, dry place if the device is not going
to be used in a long period of time.
Fig. 3
Following the below illustration, keep the vacuuming tube vertically, align
the tab on the vacuuming tube with the guides in the handheld vacuum
cleaner and introduce the tube.
Fig 4.
4. OPERATION
Wall charging base installation
- First, fix the wall charging base. To do so, we recommend you place a
protective film (not included) on the wall’s surface. Then, put the charging
base on the wall and make 3 corresponding to the holes to be drilled in
order to fix the base. Take into account the height of the installation, it is
important that suction base rests on the floor to avoid the charging base
from holding all the vacuum cleaner’s weight. Make 3 holes on the wall