92
ENGLISH
Problem description
Possible causes
Possible solutions
The washing machine
does not start
The door is not closed
properly
Restart after the door is
closed
Check if there are clothes
stuck
You cannot open the door
The protection system of the
washing machine is active
Unplug the device and restart
the product
Water leakage
Poor connection between the
inlet pipe and the drain hose
Check the hoses and connect
them properly
Clean up outlet hose
Detergent residues in the
box
Detergent is dampened or
agglomerated
Clean and wipe the detergent
box
Indicator or display does
not light
The printed circuit board is
disconnected or there is a
connection problem in the
wiring
Check if the power is shut
down and the power plug is
connected correctly
Abnormal noise
Check you have removed the
transport bolts
Check it is installed in a level
and solid surface
Check the washing machine
is level
Display warnings
Error on the display
Cause
Solution
E30
Door is not closed properly
Restart after the door is
closed
Check if there are clothes
stuck
E10
Water injecting problem while
washing
Check if the water pressure is
too low.
Check the water supply
hose is not twisted, rolled or
crushed
Check if the inlet valve filter is
blocked
02380_Bolero DressCode Top 80 Inverter_Manual_YV_01220209.indd 92
02380_Bolero DressCode Top 80 Inverter_Manual_YV_01220209.indd 92
10/2/22 9:43
10/2/22 9:43