BOLERO DRESSCODE TOP 80 INVERTER
91
ENGLISH
4.
Use a brush to clean the filter.
5.
Install the filter again in the water supply and connect the water supply hose again.
6.
Clean the inlet filter every 3 months to guarantee the normal operation of the device.
Detergent drawer cleaning
Fig. 22
1.
Press the softener cover in the direction of the arrow as shown in figure 22.
2.
Lift the tab, remove the softener compartment cover and wash all the slots with water.
3.
Place the softener cover again and gently push the drawer into position.
Note
-
Do not use abrasive or corrosive products to clean the plastic parts.
-
Clean the detergent drawer every 3 months to guarantee the normal operation of the
device.
Cleaning the drain pump filter
Warning
-
Make sure the machine has finished the washing cycle and is empty. Turn it off and unplug
it from the mains supply before cleaning the drain pump filter.
-
Be careful with hot water as when cleaning the drain pump filter it is common for water to
be released. Wait for the water to cool down before cleaning this filter. Risk of burns
-
Clean the filter periodically every 3 months to guarantee the normal operation of the
device.
Fig. 23
1.
Remove the cover in the lower part of the washing machine.
2.
Remove the filter by turning it counterclockwise.
3.
Remove any strange object.
4.
Replace the cover.
7. TROUBLESHOOTING
-
Follow the indications on this table to try and solve the problem on your own before
contacting the Cecotec Technical Support Service.
02380_Bolero DressCode Top 80 Inverter_Manual_YV_01220209.indd 91
02380_Bolero DressCode Top 80 Inverter_Manual_YV_01220209.indd 91
10/2/22 9:43
10/2/22 9:43