![cecotec 05680 Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/cecotec/05680/05680_instruction-manual_2578530027.webp)
CONGA ROCKSTAR 2000 ULTIMATE-ERGOWET CONNECTED
|
27
ENGLESK
5. CLEANING AND MAINTENANCE
Filters and tank cleaning
- Disconnect the appliance from the power supply, take the battery out, and
allow it to cool down before cleaning.
- To avoid the appliance from overheating and losing suction power, it is
suggested to clean the filters frequently. To make the most of the suction
power, it is suggested to clean the filter every week.
- The filter’s lifespan will vary depending on the time of operation and the
type of particles vacuumed normally, and it is suggested to replace them
every 6 months.
- To take the filters out, press the dust tank opening button, marked with the
word “CLEAN”, and pull on the metallic handle to remove the filtering system.
Once the filtering system is out, turn the metallic handle anticlockwise and
take the high-efficiency filters out. Fig. 19
- To properly clean both filters, they can be either cleaned while dry, or
cleaned while dry and then with water (no cleaning product). Fig. 20
Important
- To avoid motor defaults after cleaning the filter with water, the filters
must be reinstalled when completely dry.
- To empty the dust tank, press the dust tank’s lower opening button, open
it and empty it. Fig. 21
Cleaning the appliance
- Use a soft, damp cloth to clean the surface of the product. Do not immerse
the appliance in water or other liquid.
- Do not use abrasive cleaners or scouring pads to clean the product.
- After the brush has been used for a long time, bristles might start to tangle
with hair and other particles. Clean it in order for it to operate correctly
again.
Cleaning the Jaliscazo brush
- Move the rotary brush release button with the finger toward the arrow
and remove the cover of one of the ends of the brush.
- Take one end of the brush out as shown on the image.
- It is important to clear and clean all the residues left in the brush’s rotary
axis.
- After washing and drying all the parts, assemble it back in order to use the
brush again. Fig. 22
How to remove the battery
Press the battery release button and take the battery out as shown on the