cecotec 05613, Инструкция по эксплуатации

Страница: 20 / 24

ENGLISH ENGLISH
Auto shut-off system
When the tank runs out of water, the device will automatically stop operating. The empty
water indicator will turn on.
Refill the water tank, and the device will continue operating with the previous settings. If the
tank is not refilled, the device will turn off after 15 minutes.
Touch the light symbol to choose between the 3 different levels of blue light intensity. Tap 4
times to turn it off.
The device keeps the Wi-Fi connection activated during operation. To connect it, follow the
instructions on the App manual section.
In order to link your product with our App, please follow the below steps.
Download the BreezeCare App from Google Play or App Store.
If it is the first time you use it, register an account. If not, log in.
Once you have entered the App, press “+” on the top right-hand corner and tap “Breeze Care”.
Turn your device on and hold down the power button for 5 seconds until the device beeps.
Check that the Wi-Fi icon is blinking.
Enter your Wi-Fi password and press confirm.
Then, the linking process will start automatically.
Warnings:
Never run the humidifier when there is no water in water the tank and water basin.
Do not pour any liquid other than clean water into the water tank or water base.
5
. CLEANING AND MAINTENANCE
Use a soft, damp cloth to clean the surface of the device.
Do not use detergent, scouring pads, chemically treated cloths, gasoline, benzene, alcohol,
thinner, or other solvents, as these can scratch and damage the tank and cause water
leakage.
Do not immerse the product in water or any other liquid.
If scale is built up due to the use of hard water, it is recommended to:
Use cold boiled water or distilled water.
Clean the transducer, water tank and basin humidifier every week.
Change the water in water tank more often to keep it fresh.
Make sure to pour out water from the water tank and dry the water basin before you store it
unused for a long time.
Clean the whole humidifier and make sure that all parts of the humidifier are dried completely
if it is supposed to be leaved unused for a long time.
Cleaning the transducer
Clean with clean water or citric acid if there is scale in it.
Brush off the scale from the surface.
Rinse the transducer with clean water.
Cleaning the humidifier basin
Clean the water basin with soft cloth or use citric acid if there is scale in it.
If there is scale covering the security switch, drop citric acid for 2-5 mins on the scale and
clean it out with the brush.
Rinse the water basin with clean water.
6
. TROUBLESHOOTING
Trouble Possible cause Solution
The light indicator is
off when switched
on
The humidifier is not plugged
in. Plug the humidifier into a powered
electrical socket.
Power cord is damaged.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
Humidifier is defective or
malfunctioning.
The light indicators
is on when switched
on, but no mist
comes out Humidifier is not turned on. Press the power button to turn it on.
The target humidity is
reached. Increase the target humidity or
change mode.
Water shortage
indicator is on
No water in the tank.
Refill the water tank and wait at
least 1 minute.
Water level is low.
The water level required
has not yet reached the
vaporisation compartment.
Wait at least 1 minute.
The water tank isn’t well
positioned. Check the positioning of tank on the
base.
The humidifier isn’t on a flat
surface. Check the positioning of the
humidifier.
The % RH of the room is over
90 %.
Wait until the % RH gets lower.
BREEZECARE 4000 CONNECTED BREEZECARE 4000 CONNECTED
38 37