cecotec 04110, Инструкция по эксплуатации

Страница: 10 / 23

18 19 STRONG-EXTREMETITANIUM 19000 XXL STRONG-EXTREMETITANIUM 19000 XXL
supervision is necessary when the appliance is being used by or near children.
3. BEFORE USE
• Take the product out of the box and remove all packaging materials.
• Make sure all parts and accessories are present and in good conditions. If not, contact
immediately the Technical Support Service of Cecotec.
• Clean thoroughly all the product’s parts that come into contact with ingredients before
operating it for the first time.
4. PRODUCT ASSEMBLY
This juicer is designed with a double safety system and can only operate when all parts are
properly installed.
Follow the steps below to assemble and operate it correctly.
1. Turn the power-level knob to position “0” and place the centre bowl inside the main body
as shown in figure 1.
2. Place the filter inside the centre bowl as shown in figure 2 and make sure the filter is
properly installed on the motor gear.
3. Put the ingredients inlet on the main body as shown in figure 3 and close it following the
direction indicated on it.
4. Use the clamps to close the product. The product will not be able to operate unless it is
completely and safely closed.
5.
•
Slightly tilt and place the pomace cup under the centre bowl’s outlet.
• Push the pomace cup’s bottom part towards the main body in order to install it properly.
6. Place the juice container under the juice spout.
7. Make sure the power level knob is set at “0” and connect the product to a power supply.
8. Clean, peel (in case it has shell) and remove fruit and vegetable pips. Then, cut them into
pieces according to the inlet size.
9. Use the power level knob to select the desired operating power level depending on the
type of fruit or vegetable (refer to the “Tips” section).
NOTE: to lengthen the juicer’s service life, do not operate it continuously for more than 1
minute.
10. Introduce the cut fruits and vegetables through the ingredients inlet’s inlet and use the
pusher to gently press them down (do not use too much force, otherwise this could affect
the quality of the end result).