Cecilware MT-2-ULAF, Руководство оператора

Страница: 7 / 16

MHV 2 UL AF
Ugolini spa 7
figure 6
3 - Slide the outer spiral out (see figure 7) and then the inside
auger (see figure 8).
figure 7
figure 8
4 - Remove the bowl gasket from its seat (see figure 9).
figure 9
5 - Dismantle the faucet assembly (see figure 10).
figure 10
6 - Slide the drip tray out and empty it.
5. 3. 2 CLEANING
1 - Prepare at least two gallons of a mild cleaning solution of
w a r m ( 4 5 - 6 0 ° C 1 2 0 - 1 4 0 ° F ) p o t a b l e w a t e r a n d
dishwashing detergent. Do not use abrasive detergent.
Important: if present, follow label directions, as too strong
a solution can cause parts damage, while too mild a solu-
tion will not provide adequate cleaning.
2 - Using a brush, suitable for the purpose, thoroughly clean
all disassembled parts in the cleaning solution.
3 - Do not immerse the lighted top covers in liquid. Wash them
apart with the cleaning solution. Carefully clean their
undersides.
4 - In the same manner clean the evaporator cylinder(s) using
a soft bristle brush.
5 - Rinse all cleaned parts with cool clean water.
ATTENTION
Before any disassembly and/or cleaning procedure
make sure that the dispenser is disconnected from its
power source.
IMPORTANT
Do not attempt to wash any machine components in a
dishwasher.
IMPORTANT
In order to prevent any damages to the dispenser use
only a detergent suitable with plastics parts
ATTENTION
When cleaning the machine, do not allow excessive
amounts of water around the electrically operated
components of the unit. Electrical shock or damage to
the machine may result.