CEAG Notlichtsysteme GmbH
13
Operating instructions
Alu-Klick exit and escape luminaires
70011...79011 (CG-S)
6
Installation
For the mounting and
operation of electrical
apparatus, the
respective national
safety regulations as
well as the general
rules of engineering
will have to be
observed.
6.1 Mounting
Remove cover (see fig. 2).
For RZ 71011 (CG-S) IP54:
Open and remove IP54 -
bowl with help of a
screwdriver. Then detach the
body of luminare (see below
fig. 23).
Introduce mains cable.
Mount enclosure with 2
screws and 2 dowels
through the fixing holes at
the ceiling or wall.
For pendulum set mounting
and chain suspension see
manual of accessory set!
Connect mains to terminals
L(U), N(O) and PE (see below
fig. 24)
For RZ 71011 (CG-S) IP54
see below fig. 25.
Address CG-S luminaire (s.
chapter 6.2).
Insert lamp (by IP54 first
additionally body of
luminaire).
Insert cover (see fig. 1).
6.2 Addressing
Before fitting the screen or
bowl, the individual
addressing of the luminaire
with CG-S function at the
address switch 1 and 2 will
have to be performed. To do
so, use a suitable screw
driver (Arrowhead to no., see
fig. 26...28). If the luminaire
should not be monitored the
code 0/0 has to be selected.
fig. 26
Address switch
For 71011 CG-S IP 54:
Address switch
fig. 27
fig. 28
