Clean the motor housing and the tray
with a cloth dampened with water or alcohol
or with a spray neutral solution.
Wipe with a dry cloth.
Never put the appliance under running
water and never immerse in water.
Once the hopper has been removed it can
be washed with lukewarm water and neutral
soap, then rinse it and dry well.
Cleaning the doser unit requires great
care because inside it there is an
electromechanical device which could get
damaged.
-
Use a brush or a paintbrush (Fig. 8) to clean
the most hidden areas inside the unit and a
dry cloth for the other surfaces.
MAINTENANCE
Maintenance must be carried out exclusively by qualified technical personnel.
Care for the mechanical and electrical parts of the appliance is indispensable in order to guarantee
their safety and efficiency. If any parts need replaced, authentic spare parts must always be used.
GB
20
TROUBLESHOOTING
(See Table on the next page)
In case of any malfunction, defect of the appliance or if you suspect any breakage after a fall, unplug
the appliance immediately.
If you are unable to solve the problem referring to the table below, contact an Authorized Service
Centre.
Only qualified experts should repair the appliance.
We are not liable for any damage caused by repairs not made correctly and/or by unauthorized
personnel. In these cases the warranty does not apply.
Fig. 8
