28
GB
Manual operation
To grind coffee continuously, without any time setting, press the buttons
and
simultaneously.
Both LEDs will light up and the display will show:
Taking out the coffee
When the appliance is READY, to start grinding press the start button (11 Fig. 1) with the filter
holder and keep the filter holder in position until distribution is ended. During operation the
respective LED flashes and the message
WORKING
appears on the display.
Note:
Only in automatic operation, the display will also show the time remaining to complete
distribution.
At the end of distribution the appliance returns to its initial READY status, waiting to grind a new shot
the same as the last one set.
Note:
When the motor is running without grinding coffee beans, it may happen that a metallic noise
is heard coming from the spout. It is normal and it is due to the vibration of the inside flap,
and it will stop when starting grinding coffee beans.
3
4
Manual dose
READY
DISTRIBUTED SHOT COUNTERS
The coffee grinder has a
general counter
in which it stores the number of shots distributed since it
left the factory (this value cannot be reset) and a
partial counter
for the number of shots distributed
since it was last reset by the user. For each type of counter, a distinction is made between the
number of single, double and extra shots.
Note:
Due to statistical tests on the product in the factory, some of the counters may be different
from zero.
Reading the counters
Press the button
. The display will show first the partial counter of the total shots (single shots
+ double shots + extra shots + manual doses):
By pressing the button
or
you can also distinguish between the single, double or extra
shots distributed since the last reset:
Total shots from
reset XXX
