7
cdvi.com
cdvigroup.com
EN
DGLIEWLC
Flush mount Stainless steel Proximity Card Readers - Wiegand
INSTALLATION MANUAL
3] MOUNTING KIT
Varistor
Diax
®
Tool
DGLIWLC
1
1
1] PRODUCTS OVERVIEW
2] RAPPELS ET RECOMMANDATIONS
Important
To protect the device from back - emf do not forget
to mount the varistor on the lock in parallel.
Recommended cables
4 twisted pairs 0.6 MM.
Environment
When in a humid area or close to a sea shore,
we recommend applying a varnish on the terminals
to avoid oxidation.
Suggested power supplies
ARD12 & BS60. These products must be powered
in 12Vdc and the power supply should be certified
EN60950-1:2006/A11:2009 standards and should
be designed to be a low power supply source.
HIGH RESIST
ANCE
TO VANDALISM
26, 30 or 44 bits Wiegand outputs.
Direct connection to the controller
or with the door controller (INTBUSW).
PCB sealed in epoxy.
Audible and visual feedback.
Stainless steel.
Dimensions (L x W x D): 110 x 110 x 47mm.
Back box (L x W x D): 90 x 90 x 45mm.
Technology: 125 kHz.
Multi card protocol reader.
Input voltage: 12V dc.
Consumption: 100mA.
Complies with European R&TTE directive 99/5/EC
and harmonised standards: ETS 301 489 and ETS
300-330-1-Ed 2001. Complies with applicable EMC
standards: EN 50133, EN 50130-4.
IP53
-30°C to +60°C
Certification FCC CFR 47
part 15 compliance
CE Certification
R&TTE certification
WEEE
Environmental
tests: vibrations
110
110
10,50
89
10,50
45,50
2
2
45,50
10,50
89
10,50
