CDVI CA-ETHR-A, Руководство по установке

Страница: 8 / 44

8
www.cdvi.com
www.cdvigroup.com
5) The HyperTerminal window appears.
From the menu bar, click File and then click Save.
Step C - Start Communication
Once HyperTerminal is set up, you must establish communication between the TCP/IP
module and the computer.
1) Make sure the HyperTerminal window is open. If not, click Start, point to Programs, point
to Accessories, point to Communications, point to the HyperTerminal folder and select
the name created in Step B.
2) Press the Reset button on the TCP/IP module, wait two seconds and type the word
postech using your computer’s keyboard. If you wait more than 5 seconds after
pressing the Reset button, you will not be able to establish communication.
3) The TCP/IP module’s Main Menu appears.
CA-ETHR-A
TCP/IP Module
INSTALLATION MANUAL
8
www.cdvi.com
www.cdvigroup.com