31
cdvigroup.com
EN
ATRIUM
2-Door Controller
INSTALLATION MANUAL
EN
ATRIUM
2-Door Controller
INSTALLATION MANUAL
CARD ENROLLMENT PROCEDURE
(USING MASTER & PROGRAMMING CARDS ONLy).
1.
Present the MASTER card to a reader.
The door will unlock.
2.
Within 5 seconds, present the PROGRAMMING card to the reader.
Reader LEDs will begin flashing in sequence
(2 Red f 2 Green).
Enrollment mode is active.
3.
Present cards, one by one, to the reader.
NEW
cards will be ADDED.
Green LED will flash and a quick beep will be emitted.
Each new card will create a user and attribute the card to the user
EXISTING
cards will be DELETED.
Red LED will flash & a long beep will be emitted.
4.
Present the PROGRAMMING card again to stop enrollment mode.
The flashing sequence (2 Red f 2 Green) will stop.
The card enrollment learning mode ends when no new card is presented for 5 minutes.
For other card enrollment methods, refer to the “ATRIUM Software” user guide.
Carte Master
Carte Programming
