CDVI 2EASY CDV-96KP, Руководство пользователя, Страница: 14 / 18

EN EN
14
CDV-96KP
2EASY 2-wire Video Door Station with Keypad
15. Temporary code
(single use only)
Password for relay 1
16. Temporary code
(single use only)
Password for relay 2
17. Setting the code
for user group 1
Locations 20 to 59
18. Setting the code
for user group 2
Locations 60 to 99
• The user code group 1 is used to release the first
lock and the user code group 2 is used to release
the second lock (the second lock requires external
device CDV-RLC to support this function).
• If the password length exceeds 12 digits, the
system will emit 4 beeps eg. “beep, beep, beep,
beep”, and the digits you input before will be
cleared at the same time.
• The user code can not be set the same as the
master code and temporary code.
• When the “* cancel” key is pressed, the indicator will show the
standby color, the buzzer beeps, and the system will exit the out of
programming mode.
• When there isn’t any operation within 10s, the indicator will show
the standby color, the buzzer beeps, and the system will exit the
programming mode.
• When a setting input fails, the color of key indicator will turn red and
the buzzer will beep.
Enter the setting code
18+#
Colour of key indicator
(green)
--> Beep+, Beep
Enter the setting code
19+#
Enter the setting code
20+#
Enter the setting code
60+#
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Enter code req.
(ex.: 1006)
1-12 digits
1006+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Enter code req.
(ex.: 2011)
1-12 digits
2011+#
Enter code req.
(ex.: 2021)
1-12 digits
2021+#
Enter code req
(ex.2020)
1-12 digits
201+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+
Enter the master code
(Default: [ 1 2 3 4 ] + [#] )
The colour of key indicator (blue-white)
--> Beep+, Beep
• When the correct temporary password has been
used to release the door the system will clear
the temporary password after 60 seconds. The
password is still valid for 60 seconds after entering
the correct temporary password
• Temporary 1 is used to release the first lock
and temporary 2 is used to release the second
lock (the second lock requires external device,
CDV-RLC, to support this function).
• If the password length exceeds 12 digits, the
system will emit 4 beeps eg. and the digits
entered before will be cleared at the same time.
• The temporary code can not be set the same as
the master code and user code.