CDVI 2EASY CDV-96KP, Руководство пользователя, Страница: 10 / 18

EN EN
10
CDV-96KP
2EASY 2-wire Video Door Station with Keypad
Each operation is indicated by the keys and
nameplate lighting up, as well as the buzzer
sounding.
Enter the master code
(Default: [ 1 2 3 4 ] + [#] )
The colour of key indicator will light up
(blue-white) and beep, notifying that you
entered the settings mode
1. Reset all settings
2. Setting master
code
(Default: 1234)
3. Setting key
illumination time
(Default: 10s)
4. Setting
unlock time
(Default: 1s)
- All settings will restore
to their default value.
- With power on and the
reset activated, the key
illumination will blink
and the touching will not
operate, once complete
the key illumination will
stop flashing and a long
beep will be emitted.
The master code can
be 1~12 digits in
length. The same code
cannot be set for both
the user code and
the master code. It is
receommended that the
master code is changed
from the default code.
- Key illumination time
set to 00 = constantly lit
when power is on.
- Key illumination time
set to 10~99 = lights
up for 10~99 seconds.
Switches off in standby
mode. Touch any key to
illuminate. This activation
only turns on the keypad.
The unlock time can be
set by both monitor and
door station, the valid
value is always the time
last set either at the
door station or monitor.
• When the “* cancel” key is pressed, the indicator will show the
standby color, the buzzer beeps, and the system will exit the out of
programming mode.
• When there isn’t any operation within 10s, the indicator will show
the standby color, the buzzer beeps, and the system will exit the
programming mode.
• When a setting input fails, the color of key indicator will turn red and
the buzzer will beep.
Enter the setting code
00+#
Colour of key indicator
(green)
--> Beep+, Beep
Enter the setting code
01+#
Enter the setting code
02+#
Enter the setting code
03+#
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Enter the mastercode
1234+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Enter new master code
(ex.)
4321+#
Enter the code req
(ex.10)
10+#
Enter the code req
(ex.10)
09+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+