EN
EN
11
CDV-96KP
2EASY 2-wire Video Door Station with Keypad
5. Setting the unlock
mode
(Default: 0 opened)
6. Setting operation
tone
(Default: ON)
7. Reset code setting
8. *&# function
setting
(Default: normal)
The unlock mode can be
set by both monitor and
door station, and the
valid value will always be
the last value set.
• When the operation
tone is set to 0,
pressing the digital
keypad will issue a
beep.
• When the operation
tone is set to 1,
pressing the digital
keypad will flash one
time.
• Cancel all passwords
except the master code
• Restore the master
code to default value
(1,2,3,4)
• When set to 0, press
the * button to cancel
the input and press the
# button to confirm
the input.
• When set to 1, press
the # button to cancel
the input and press the
* button to confirm the
input.
• When the “* cancel” key is pressed, the indicator will show the
standby color, the buzzer beeps, and the system will exit the out of
programming mode.
• When there isn’t any operation within 10s, the indicator will show
the standby color, the buzzer beeps, and the system will exit the
programming mode.
• When a setting input fails, the color of key indicator will turn red and
the buzzer will beep.
Enter the setting code
04+#
Colour of key indicator
(green)
--> Beep+, Beep
Enter the setting code
05+#
Enter the setting code
06+#
Enter the setting code
07+#
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Colour of key indicator
(green)
--> Beep+, Beep
Enter the code req.
(ex.:
1)
range: 0=NO / 1=NC
1+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Enter code req.
(ex.: 1)
range: 0=on / 1=off
1+#
Enter the code
1234+#
Enter code req
(ex.1)
Range: 0=normal / 1=reverse
1+#
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+
Colour of key indicator
(green --> blue-white)
--> Beep+
Enter the master code
(Default: [
1 2 3 4
] + [#] )
The colour of key indicator (blue-white)
--> Beep+, Beep