5
6. Adjusting the electronic coin selector:
See video at this link:
How to configure the coin model
Turn on the unit, open the front part of the case, you will see LED (7) flashing. Press
the setup button (5) during two seconds and then release it. The LED (7) indicator
on the top left will change from red to green. Press the setup button again during
two seconds and then release it. The LED (7) indicator will change from green to
red and it will then flash.
You are now in the Coin Setup Mode. Please insert 20 coin models in the insert coin
slot (we recommend inserting coins of different years and versions, do this both
quickly and slowly to imitate the normal way users would do it). When you have
finished, the Light indicator will remain on constantly.
BUTTONS AND FUNCTIONS
NAME
FUNCTION
(1)
Segment 1 switch
Differentiates accuracy: exact,
normal, loose.
(2)
Connector 4 pins
(3)
Segment 2 switch
Differentiates between NO and NC.
(4)
Segment 3 switch
Coin entry speed: fast, average
speed, slow.
(5)
Setup button
Button to make adjustments.
(6)
Connector 2 pins
Electromagnetic strobe.
(7)
LED Indicator
To configure/adjust coin.
(8)
Coin entry
Coin entry.
(9)
Coin return button
Press the button to retriever the coins
blocked in the insert slot.
(10)
Coin output
Coin output.
C.D.Products S.A
