Cool Designs Ltd makes every effort to ensure that the information provided within this publication is correct and error free, however we cannot guarantee that it is free of inaccuracies, errors or
omissions. Users should seek to clarify this information for themselves prior to basing any decisions upon such information.
How to access the advanced facilities/functions, via an RBC-NRC01 remote controller.
1)
Press “
TEST
” and the “
TEMP - DOWN
“button
together and hold for 4 seconds.
After a short delay the display will show
“01”
on the right-hand side.
2)
Using the “
TEMP UP/DOWN
” buttons scroll
through to the code you require, this will be displayed
on the right-hand side of the display.
3)
If you wish to change the “Data – Displayed on the
left-hand side of the display” use the
“
TIME – UP/DOWN
” buttons.
4)
Once you have the required data on the left-hand
display, Press “
SET
”.
5)
If there are a number of units controlled via the same
controller and you wish to change their “Data” then
press the “
UNIT
” button, the middle window will
change and the new indoor unit’s reference will be
displayed, (31-1 to 31-2 etc.) repeat step 3 above.
6)
If you wish to change additional “Codes”
Repeat steps 2 to 4 above.
7)
Once all the required “Codes” have been set
then press “
TEST
”, this will lock in the new data.
8)
The controllers display will show “Setting”
flashing, then the display will clear and the system
enters normal operation mode.
01
28
31-1
0000
28
31-2
0001
A
d
va
n
ce
d
F
u
n
ct
io
n
s
