CDA wc431, Руководство по установке, использованию и обслуживанию

Страница: 11 / 28

11
Salt
To ensure the best efficiency, the
dishwasher needs soft water. Hard
water means that lime residues remain
on the dishes and the interior of the
dishwasher, affecting performance. The
softener system is designed to remove
the ions that make the water hard to
provide the best quality wash
performance. This is achieved by using
dishwasher salt.
To Add Dishwasher Salt, Follow the
Steps Below:
1. Remove the lower dishwasher
basket and then unscrew the
salt compartment cap, as shown
in figure 3.
2. Fill the compartment with
dishwasher salt (do not use
table salt), carefully to prevent unnecessary spillage (figure
4). Before first use, you should fill the compartment with 1kg
of dishwasher salt and then fill up the salt compartment
with water (up to the brim of the compartment) as shown in
figure 4.
3. Replace the cap and the lower basket.
When the salt warning light on the control panel illuminates, you
should refill the salt compartment with salt only
–
do not add water
to the salt compartment after the first use.
Important: You should run a prewash programme immediately
after adding dishwasher salt, to prevent any damage to the
dishwasher systems.
Only fill the salt compartment with water on first use.
Fig.4
Fig.3