CDA wc431, Руководство по установке, использованию и обслуживанию

Страница: 9 / 28

9
Cancelling a Programme
It is possible to cancel the programme once is has started.
•
First open the door slightly to reduce the risk of water
spillage.
•
Press and hold in the Programme Selection button for
three seconds until the end of programme indicator flashes
and a
“
1
”
shows on the display.
•
Then close the door. The dishwasher will run a drain cycle
which will take approximately 30 seconds. Once this is
complete, the dishwasher will beep five times and the end
of programme light will switch on.
Switching the Dishwasher Off
Once the dishwasher beeps five times and the end of programme
light switches on, the dishwasher can be switched off by pressing
the Power button.
Then turn off the water tap and remove the plug from the power
socket.
Please note: the dishwasher will automatically continue on the
programme it has started if the door is opened or in the event
of a power cut.
Detergent
To Fill the Detergent Compartment
1. Push the latch to open the
compartment.
2. Add the required amount of
detergent. The main detergent
compartment
“
b
”
(figure 2)
has lines to allow for specific
amounts of detergent. These
are marked at either 15 cm
3
or
Fig.2