background image

Care and Maintenance

Before beginning any care or maintenance, you should always disconnect the 
appliance from the electricity supply, and also turn off the water supply.

Door seals

Wipe the dishwasher door seals regularly with a damp cloth to remove  
any residues.

Filters

You should clean the filters at least once a month.

1.  Remove the lower basket.

2.  Turn the microfilter anticlockwise and then lift it out as in figure 9.

3.  Remove the coarse filter from the microfilter (figure 10).

4.  Remove the base filter from the dishwasher compartment (figure 11).

 

You should clean and rinse the filters thoroughly before replacing all the  

 

sections in reverse order to that above.  The microfilter should lock into  

 

place once it is secure as shown in figure 12.

Please note: Never run a programme without the filters in place. 
Incorrect fitting of the filters may reduce wash performance and 
potentially damage your appliance.

Spray arms

You should clean the spray arms at least once a month.

1.  Remove the lower basket

2.  Pull the lower spray arm upwards to remove it.

3.  To remove the upper spray arm, first remove the nut on the upper spray  
 

arm by turning it as in figure 9.

 

You should clean and rinse the spray arms thoroughly before replacing  

 

them.  Ensure that the upper spray arm nut is securely tightened when  

 

refitting the upper spray arm.  

Dishwasher interior

To deal with an accumulation of dirt, oil or limescale in the dishwasher, run 
an intensive programme with detergent when the dishwasher is empty.  
Alternatively, there are specialist dishwasher cleaners available that can be used.

fig 9

fig 10

fig 11

20

ENGLISH

MAINTENANCE AND CLEANING

Cleaning the machine in regular intervals prolongs the machine's service life.

Oil and lime may accumulate in the machine's washing section. In case of such
accumulation;

Cleaning the seals in the machine door,

Cleaning the machine,

Filters

-Fill the detergent compartment without loading any dishes into the machine, select a

programme that runs at high temperature, and start the machine. In case of insufficiency, use

special cleansing material available in the market. (Cleansing material produced special to

machines by detergent producers.)

-To clean any accumulated residues in the door seals, wipe the seals regularly by using a

dampened cloth.

Clean the filters and spray arms at least once a week.

Unplug your machine and turn off its tap before starting the cleaning.

Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material

and a dampened cloth.

Check if any food wastes have remained on the coarse and fine

filters.

If any food wastes are left, remove the filters and clean them

thoroughly under the water tap.

a. Micro Filter

b. Coarse Filter

c. Metal/Plastic Filter

To remove and clean the filter combination, turn it counter

clockwise and take it out by lifting upwards.1

Pull and remove the metal/plastic

filter. 3 Then pull the coarse filter out

of the micro filter.2 Rinse it with lots of

water under the tap. Refit the

metal/plastic filter. Insert the coarse

filter into the micro filter in a way that

the marks will correspond to one

another. Attach micro filter into the

metal/plastic filter and turn to the

direction of arrow and it is locked

when the arrow on micro filter can be

seen from across. 4

• Never use your dishwasher without any filter.

• Incorrect fitting of the filter will reduce the washing effectiveness.

• Clean filters are very important in terms of the proper running of the machine.

20

ENGLISH

MAINTENANCE AND CLEANING

Cleaning the machine in regular intervals prolongs the machine's service life.

Oil and lime may accumulate in the machine's washing section. In case of such
accumulation;

Cleaning the seals in the machine door,

Cleaning the machine,

Filters

-Fill the detergent compartment without loading any dishes into the machine, select a

programme that runs at high temperature, and start the machine. In case of insufficiency, use

special cleansing material available in the market. (Cleansing material produced special to

machines by detergent producers.)

-To clean any accumulated residues in the door seals, wipe the seals regularly by using a

dampened cloth.

Clean the filters and spray arms at least once a week.

Unplug your machine and turn off its tap before starting the cleaning.

Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material

and a dampened cloth.

Check if any food wastes have remained on the coarse and fine

filters.

If any food wastes are left, remove the filters and clean them

thoroughly under the water tap.

a. Micro Filter

b. Coarse Filter

c. Metal/Plastic Filter

To remove and clean the filter combination, turn it counter

clockwise and take it out by lifting upwards.1

Pull and remove the metal/plastic

filter. 3 Then pull the coarse filter out

of the micro filter.2 Rinse it with lots of

water under the tap. Refit the

metal/plastic filter. Insert the coarse

filter into the micro filter in a way that

the marks will correspond to one

another. Attach micro filter into the

metal/plastic filter and turn to the

direction of arrow and it is locked

when the arrow on micro filter can be

seen from across. 4

• Never use your dishwasher without any filter.

• Incorrect fitting of the filter will reduce the washing effectiveness.

• Clean filters are very important in terms of the proper running of the machine.

20

ENGLISH

MAINTENANCE AND CLEANING

Cleaning the machine in regular intervals prolongs the machine's service life.

Oil and lime may accumulate in the machine's washing section. In case of such
accumulation;

Cleaning the seals in the machine door,

Cleaning the machine,

Filters

-Fill the detergent compartment without loading any dishes into the machine, select a

programme that runs at high temperature, and start the machine. In case of insufficiency, use

special cleansing material available in the market. (Cleansing material produced special to

machines by detergent producers.)

-To clean any accumulated residues in the door seals, wipe the seals regularly by using a

dampened cloth.

Clean the filters and spray arms at least once a week.

Unplug your machine and turn off its tap before starting the cleaning.

Do not use hard materials when cleaning your machine. Wipe with a fine cleaning material

and a dampened cloth.

Check if any food wastes have remained on the coarse and fine

filters.

If any food wastes are left, remove the filters and clean them

thoroughly under the water tap.

a. Micro Filter

b. Coarse Filter

c. Metal/Plastic Filter

To remove and clean the filter combination, turn it counter

clockwise and take it out by lifting upwards.1

Pull and remove the metal/plastic

filter. 3 Then pull the coarse filter out

of the micro filter.2 Rinse it with lots of

water under the tap. Refit the

metal/plastic filter. Insert the coarse

filter into the micro filter in a way that

the marks will correspond to one

another. Attach micro filter into the

metal/plastic filter and turn to the

direction of arrow and it is locked

when the arrow on micro filter can be

seen from across. 4

• Never use your dishwasher without any filter.

• Incorrect fitting of the filter will reduce the washing effectiveness.

• Clean filters are very important in terms of the proper running of the machine.

fig 12

Содержание WC140



















Отзывы: