CDA HN3621FR, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 28

9
• If switching off both zones, the above step needs to be taken
for each zone. When both the zones are at "0", the hob will switch
off automatically after approximately twenty seconds.
• Alternatively, to switch off the hob immediately, touch and hold the
"On/off sensor" (1) for approximately two seconds. Any zones that
are still hot to the touch will display an " ".
Please note: In case of a cut to the power supply, the residual heat
indicators will not be displayed yet the zones may still be hot to the
touch. It is advisable to refrain from touching the hob top, particularly
with bare hands, for some time after use.
Operating time limiter
In addition to the booster deactivation timer, each zone has an
operating time limiter to increase overall efficiency and to prevent
the hob from being left on indefinitely. If a zone's heat setting is
not changed for a specific duration then the associated zone is
automatically switched off and residual heat indicator activated.
Zones can still be used as normal in accordance with the operating
instructions. The operating time limiter is set according to the last
selected heat setting. The maximum operating times for each setting
can be found on page 10.
Please note: In order to conserve electricity and ensure maximum
efficiency of the hob, heat setting "9" will automatically reduce to heat
setting "8" after 30 minutes of continuous usage.