CDA HN3621FR, Инструкция по установке, эксплуатации и обслуживанию, Страница: 12 / 28

12
Please note: Cancelling the timer will not switch off the zone. You
should switch the zone off manually if required.
To set the minute minder
The timer can also be used as a minute minder when the hob is not in
use.
• Switch the hob on using the on/off sensor (1).
• Touch the “+” and “-” setting selectors simultaneously to activate
the minute minder.
• Use the “+” and “-” setting selectors to set the desired time in
minutes.
To cancel the minute minder
• Touch the “+” and “-” setting selectors simultaneously to activate
the minute minder.
• Use the “+” and “-” setting selectors to return the timer displays to
“0”
Residual Heat Indicators
Residual heat indicators warn when any of the zones are still hot
to the touch after use. An “ ” will show in a zone’s indicator if the
relevant zone is above approximately 45°c. Avoid touching any zone
whilst the hob is in use or whilst a residual heat indicator is displayed.
In the event of a power cut or failure, the residual heat indicators will
illuminate after the power supply is restored. When there is no power
supply to the hob however the residual heat indicators will not work,
yet the hob zone(s) may still be hot, so extra care must be taken.